Citrix NetScaler Appliance Status and Performance - G2

Description

Applicable on the NetScaler appliance. It could be the NetScaler MPX,SDX or the VPX series. This template has been tested on a VPX,the software-based virtual appliance. Monitors CPU utilization,memory utilization,disk utilization,cache hit ratio,http stats,current connection stats,high availability status,servers status,service group member stats,services stats,services monitoring status,services status,ssl certificate expiry period,vserver stats,system fan speed,voltage,temperature and power supply status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Netscaler Appliance Monitoringsystem.memory.util.percentNetscaler Memory Utilization%Monitors the percentage of memory utilization on NetScaler.[OID: 1.3.6.1.4.1.5951.4.1.1.41.2.0]
citrix.netscaler.cache.hit.percentNetscaler Cache Hit Percent%Monitors the cache hits as percentage of the total number of requests.[OID: 1.3.6.1.4.1.5951.4.1.1.49.12.0]
citrix.netscaler.servers.httpresponsesNetscaler Sent HTTP ResponsespsecMonitors the total number of HTTP responses sent per second.[OID: 1.3.6.1.4.1.5951.4.1.1.48.53.0]
citrix.netscaler.clients.httprequestsNetscaler Received HTTP RequestspsecMonitors the total number of HTTP requests received per second.[OID: 1.3.6.1.4.1.5951.4.1.1.48.67.0]
citrix.netscaler.tcp.serverconnNetscaler Server ConnectionsMonitors the server connections,including connections in the Opening,Established,and Closing state.[OID: 1.3.6.1.4.1.5951.4.1.1.46.1.0]
citrix.netscaler.tcp.clientconnNetscaler Client ConnectionsMonitors the client connections,including connections in the Opening,Established,and Closing state.[OID: 1.3.6.1.4.1.5951.4.1.1.46.2.0]
citrix.netscaler.tcp.serverconn.estbNetscaler Established Server ConnectionsMonitors the current server connections in the Established state,which indicates that data transfer can occur between the NetScaler and the server.[OID: 1.3.6.1.4.1.5951.4.1.1.46.10.0]
citrix.netscaler.tcp.clientconns.estbNetscaler Established Client ConnectionsMonitors the current client connections in the Established state,which indicates that data transfer can occur between the NetScaler and the client.[OID: 1.3.6.1.4.1.5951.4.1.1.46.12.0]
citrix.netscaler.highavailability.statusNetscaler HA StatusMonitors the high-availability system state. Possible values are 0 - unknown,1- init: Indicates that the node is in the process of becoming part of the high availability configuration,2- down,3 - up: Indicates that the node is accessible and can function as either a primary or secondary node,4- partialFail: Indicates that one of the high availability monitored interfaces has failed because of a card or link failure. This state triggers a failover,5 -monitorFail,6 -monitorOk,7- completeFail: Indicates that all the interfaces of the node are unusable,because the interfaces on which high availability monitoring is enabled are not connected or are manually disabled. This state triggers a failover,8- dumb: Indicates that the node is in listening mode. It does not participate in high availability transitions or transfer configuration from the peer node. This is a configured value,not a statistic,9- disabled: Indicates that the high availability status of the node has been manually disabled. Synchronization and propagation cannot take place between the peer nodes,10- partialFailSsl: Indicates that the SSL card has failed. This state triggers a failover,11- routemonitorFail: Indicates that the route monitor has failed. This state triggers a failover.[OIDs: 1.3.6.1.4.1.5951.4.1.1.23.23.0,1.3.6.1.4.1.5951.4.1.1.23.24.0]
citrix.netscaler.highavailability.lasttransitionNetscaler HA Last State Transition TimesMonitors the time since the NetScaler underwent a state change from primary to secondary or vice-versa.[OIDs: 1.3.6.1.4.1.5951.4.1.1.23.1.0,1.3.6.1.4.1.5951.4.1.1.23.2.0,1.3.6.1.4.1.5951.4.1.1.23.3.0,1.3.6.1.4.1.5951.4.1.1.23.4.0,1.3.6.1.4.1.5951.4.1.1.23.5.0]
Netscaler CPU Utilizationsystem.cpu.utilizationNetscaler CPU Utilization%Monitors the CPU utilization percentage.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.6.1.1,1.3.6.1.4.1.5951.4.1.1.41.6.1.2]
Netscaler Disk Utilizationsystem.disk.util.percentNetscaler Disk Utilization%Monitors the Percentage of the disk space used.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.8.1.1,1.3.6.1.4.1.5951.4.1.1.41.8.1.2,1.3.6.1.4.1.5951.4.1.1.41.8.1.3,1.3.6.1.4.1.5951.4.1.1.41.8.1.4,1.3.6.1.4.1.5951.4.1.1.41.8.1.5]
Netscaler Servers Statuscitrix.netscaler.server.statusNetscaler Server StatusMonitors the state of the server. Possible values are 1- down,2- unknown,3- busy,4- outOfService,5- transitionToOutOfService,7- up,8- transitionToOutOfServiceDown.[OIDs: 1.3.6.1.4.1.5951.4.1.2.2.1.1,1.3.6.1.4.1.5951.4.1.2.2.1.2,1.3.6.1.4.1.5951.4.1.2.2.1.3]
Netscaler Service Monitors Statuscitrix.netscaler.monprobe.statusNetscaler Service Monitor StatusMonitors the service monitor status. Possible values are 0- monitorStateNotProbed,1- monitorStateDown,2- monitorStateUnknown,6- monitorStateDisabled,7- monitorStateUp.[OIDs: 1.3.6.1.4.1.5951.4.1.2.10.1.1,1.3.6.1.4.1.5951.4.1.2.10.1.3]
citrix.netscaler.monprobes.failedNetscaler Failed Monitoring ProbespsecMonitors the number of monitoring probes failed.[OIDs: 1.3.6.1.4.1.5951.4.1.2.10.1.1,1.3.6.1.4.1.5951.4.1.2.10.1.10,1.3.6.1.4.1.5951.4.1.2.9.1.1]
Netscaler SSL Certificate Expiry Periodcitrix.netscaler.sslcert.daysto.expireNetscaler SSL Certificate Days To ExpireDaysMonitors the number of days remaining for the certificate to expire.[OIDs: 1.3.6.1.4.1.5951.4.1.1.56.1.1.1,1.3.6.1.4.1.5951.4.1.1.56.1.1.2,1.3.6.1.4.1.5951.4.1.1.56.1.1.5]
Netscaler System Fan Speedcitrix.netscaler.system.fanspeedNetscaler System Fan SpeedrpmMonitors the system fan speed.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Power Supply Statuscitrix.netscaler.system.powersupply.statusNetscaler System Power Supply StatusMonitors the system power supply status. The appliance has 2 power supply units. The appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. Possible values are 0-Normal,1 - Not preset,2 - failed,3- Not supported.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Temperaturecitrix.netscaler.system.temperatureNetscaler System TemperatureCMonitors the temperature.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Voltagecitrix.netscaler.system.voltageNetscaler System VoltagevMonitors the system voltage.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]

Citrix NetScaler Appliance Status and Performance - v2

Description

Applicable on the NetScaler appliance. It could be the NetScaler MPX,SDX or the VPX series. This template has been tested on a VPX,the software-based virtual appliance. Monitors CPU utilization,memory utilization,disk utilization,cache hit ratio,http stats,current connection stats,high availability status,servers status,service group member stats,services stats,services monitoring status,services status,ssl certificate expiry period,vserver stats,system fan speed,voltage,temperature and power supply status.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Citrix Netscalar Virtual Server Statecitrix_netscalar_VsvrStateCitrix Netscalar Virtual Server StateMonitors the citrix netscalar virtual server state.[NS-ROOT-MIB::vsvrState:1.3.6.1.4.1.5951.4.1.3.1.1.5]
Netscaler Appliance Monitoring-citrix.netscaler.tcp.serverconnNetscaler Server ConnectionsMonitors the server connections,including connections in the Opening,Established,and Closing state.[OID: 1.3.6.1.4.1.5951.4.1.1.46.1.0]
citrix.netscaler.servers.httpresponsesNetscaler Sent HTTP ResponsespsecMonitors the total number of HTTP responses sent per second.[OID: 1.3.6.1.4.1.5951.4.1.1.48.53.0]
citrix.netscaler.cache.hit.percentNetscaler Cache Hit Percent%Monitors the cache hits as percentage of the total number of requests.[OID: 1.3.6.1.4.1.5951.4.1.1.49.12.0]
citrix.netscaler.tcp.clientconnNetscaler Client ConnectionsMonitors the client connections,including connections in the Opening,Established,and Closing state.[OID: 1.3.6.1.4.1.5951.4.1.1.46.2.0]
citrix.netscaler.tcp.clientconns.estbNetscaler Established Client ConnectionsMonitors the current client connections in the Established state,which indicates that data transfer can occur between the NetScaler and the client.[OID: 1.3.6.1.4.1.5951.4.1.1.46.12.0]
system.memory.util.percentNetscaler Memory Utilization%Monitors the percentage of memory utilization on NetScaler.[OID: 1.3.6.1.4.1.5951.4.1.1.41.2.0]
citrix.netscaler.highavailability.statusNetscaler HA StatusMonitors the high-availability system state. Possible values are 0 - unknown,1- init: Indicates that the node is in the process of becoming part of the high availability configuration,2- down,3 - up: Indicates that the node is accessible and can function as either a primary or secondary node,4- partialFail: Indicates that one of the high availability monitored interfaces has failed because of a card or link failure. This state triggers a failover,5 -monitorFail,6 -monitorOk,7- completeFail: Indicates that all the interfaces of the node are unusable,because the interfaces on which high availability monitoring is enabled are not connected or are manually disabled. This state triggers a failover,8- dumb: Indicates that the node is in listening mode. It does not participate in high availability transitions or transfer configuration from the peer node. This is a configured value,not a statistic,9- disabled: Indicates that the high availability status of the node has been manually disabled. Synchronization and propagation cannot take place between the peer nodes,10- partialFailSsl: Indicates that the SSL card has failed. This state triggers a failover,11- routemonitorFail: Indicates that the route monitor has failed. This state triggers a failover.[OIDs: 1.3.6.1.4.1.5951.4.1.1.23.23.0,1.3.6.1.4.1.5951.4.1.1.23.24.0]
citrix.netscaler.tcp.serverconn.estbNetscaler Established Server ConnectionsMonitors the current server connections in the Established state,which indicates that data transfer can occur between the NetScaler and the server.[OID: 1.3.6.1.4.1.5951.4.1.1.46.10.0]
citrix.netscaler.highavailability.lasttransitionNetscaler HA Last State Transition TimesMonitors the time since the NetScaler underwent a state change from primary to secondary or vice-versa.[OIDs: 1.3.6.1.4.1.5951.4.1.1.23.1.0,1.3.6.1.4.1.5951.4.1.1.23.2.0,1.3.6.1.4.1.5951.4.1.1.23.3.0,1.3.6.1.4.1.5951.4.1.1.23.4.0,1.3.6.1.4.1.5951.4.1.1.23.5.0]
citrix.netscaler.clients.httprequestsNetscaler Received HTTP RequestspsecMonitors the total number of HTTP requests received per second.[OID: 1.3.6.1.4.1.5951.4.1.1.48.67.0]
Netscaler CPU Utilizationsystem.cpu.utilizationNetscaler CPU Utilization%Monitors the CPU utilization percentage.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.6.1.1,1.3.6.1.4.1.5951.4.1.1.41.6.1.2]
Netscaler Disk Utilizationsystem.disk.util.percentNetscaler Disk Utilization%Monitors the Percentage of the disk space used.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.8.1.1,1.3.6.1.4.1.5951.4.1.1.41.8.1.2,1.3.6.1.4.1.5951.4.1.1.41.8.1.3,1.3.6.1.4.1.5951.4.1.1.41.8.1.4,1.3.6.1.4.1.5951.4.1.1.41.8.1.5]
Netscaler Servers Statuscitrix.netscaler.server.statusNetscaler Server StatusMonitors the state of the server. Possible values are 1- down,2- unknown,3- busy,4- outOfService,5- transitionToOutOfService,7- up,8- transitionToOutOfServiceDown.[OIDs: 1.3.6.1.4.1.5951.4.1.2.2.1.1,1.3.6.1.4.1.5951.4.1.2.2.1.2,1.3.6.1.4.1.5951.4.1.2.2.1.3]
Netscaler Service Monitors Statuscitrix.netscaler.monprobe.statusNetscaler Service Monitor StatusMonitors the service monitor status. Possible values are 0- monitorStateNotProbed,1- monitorStateDown,2- monitorStateUnknown,6- monitorStateDisabled,7- monitorStateUp.[OIDs: 1.3.6.1.4.1.5951.4.1.2.10.1.1,1.3.6.1.4.1.5951.4.1.2.10.1.3]
citrix.netscaler.monprobes.failedNetscaler Failed Monitoring ProbespsecMonitors the number of monitoring probes failed.[OIDs: 1.3.6.1.4.1.5951.4.1.2.10.1.1,1.3.6.1.4.1.5951.4.1.2.10.1.10,1.3.6.1.4.1.5951.4.1.2.9.1.1]
Netscaler SSL Certificate Expiry Periodcitrix.netscaler.sslcert.daysto.expireNetscaler SSL Certificate Days To ExpireDaysMonitors the number of days remaining for the certificate to expire.[OIDs: 1.3.6.1.4.1.5951.4.1.1.56.1.1.1,1.3.6.1.4.1.5951.4.1.1.56.1.1.2,1.3.6.1.4.1.5951.4.1.1.56.1.1.5]
Netscaler System Fan Speedcitrix.netscaler.system.fanspeedNetscaler System Fan SpeedrpmMonitors the system fan speed.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Power Supply Statuscitrix.netscaler.system.powersupply.statusNetscaler System Power Supply StatusMonitors the system power supply status. The appliance has 2 power supply units. The appliance functions as expected with a single power supply unit. The second power supply unit is a backup unit. Possible values are 0-Normal,1 - Not preset,2 - failed,3- Not supported.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Temperaturecitrix.netscaler.system.temperatureNetscaler System TemperatureCMonitors the temperature.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]
Netscaler System Voltagecitrix.netscaler.system.voltageNetscaler System VoltagevMonitors the system voltage.[OIDs: 1.3.6.1.4.1.5951.4.1.1.41.7.1.1,1.3.6.1.4.1.5951.4.1.1.41.7.1.2]

Citrix NetScaler Load Balancer - G2

Description

Monitors the system CPU utilization,memory utilization,VM and netscalar instance’s state.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
Citrix Netscaler LB Monitoring - SDX-ROOT-MIBcitrix.netscalar.instance.stateCitrix NetScalar Instance Node StateMonitors the Netscaler instance node state.[OID: 1.3.6.1.4.1.5951.6.3.2.1.6,1.3.6.1.4.1.5951.6.3.2.1.15]
citrix.netscalar.vm.stateCitrix NetScalar VM StateMonitors the state of virtual machine whether it is running or halted.[OIDs: 1.3.6.1.4.1.5951.6.3.2.1.6,1.3.6.1.4.1.5951.6.3.2.1.18]
citrix.netscalar.cpu.utilizationCitrix NetScalar CPU Utilization%Monitors the CPU usage (%) of NetScaler instance.[OIDs: 1.3.6.1.4.1.5951.6.3.2.1.6,1.3.6.1.4.1.5951.6.3.2.1.33]
citrix.netscalar.management.cpu.utilizationCitrix NetScalar Management CPU Utilization%Monitors the management CPU usage (%) of NetScaler instance.[OID: 1.3.6.1.4.1.5951.6.3.2.1.6,1.3.6.1.4.1.5951.6.3.2.1.34]
citrix.netscalar.memory.utilizationCitrix NetScalar Memory Utilization%Monitors the memory usage (%) of netScaler Instance.[OIDs: 1.3.6.1.4.1.5951.6.3.2.1.6,1.3.6.1.4.1.5951.6.3.2.1.35]

Citrix XenServer Health Check - G2

Description

Applicable on all the Xenservers in a given pool. It monitors CPU Utilization,CPU Stats,Storage Utilization,CPU Load,Memory Utilization and Uptime.

Prerequisites

No prerequisite

Supported Metric

Monitor NameMetric NameMetric Display NameUnitDescription
CPU Load - UCD-SNMP-MIBsystem.unix.load.5minCPU Load 5 MinMonitors the 5 minute cpu load average.[OID: 1.3.6.1.4.1.2021.10.1.3.2]
unix.cpu.totalCPU Total TimesSum of CPU Time in all modes.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.userCPU User Time%CPU time in User mode.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.niceCPU Nice Time%CPU Time in Nice mode.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.systemCPU System Time%CPU Time in System mode.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.idleCPU Idle Time%CPU Time in Idle mode.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.iowaitCPU IOWait Time%CPU Time in iowait mode. This is primarily a SysV thingie.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.kernelCPU Kernel Time%CPU Time in Kernel mode.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
system.unix.cpu.stats.interruptCPU Interrupt Time%CPU time in interrupt level. This is primarily a BSD thingie.[OIDs: 1.3.6.1.4.1.2021.11.50.0,1.3.6.1.4.1.2021.11.51.0,1.3.6.1.4.1.2021.11.52.0,1.3.6.1.4.1.2021.11.53.0,1.3.6.1.4.1.2021.11.54.0,1.3.6.1.4.1.2021.11.55.0,1.3.6.1.4.1.2021.11.56.0]
CPU Utilization - UCD-SNMP-MIBsystem.unix.cpu.util.percentCPU Utilization%CPU utilization is a key performance metric. It is the percentage of time the processor spends doing work (as opposed to being idle). It can be used to track CPU performance regressions or improvements.[OID: 1.3.6.1.4.1.2021.11.11.0]
Memory Utilization - UCD-SNMP-MIBsystem.unix.memoryUnix Physical Memory%Monitors the Unix Real Memory utilization.[OIDs: 1.3.6.1.4.1.2021.4.6.0,1.3.6.1.4.1.2021.4.5.0,1.3.6.1.4.1.2021.4.15.0]
system.unix.memory.swapUnix Swap Memory%Monitors the Unix Swap Memory Utilization.[OIDs: 1.3.6.1.4.1.2021.4.3.0,1.3.6.1.4.1.2021.4.4.0]
system.unix.memory.freeUnix Memory FreeKBMonitors the UNIX free memory.[OIDs: 1.3.6.1.4.1.2021.4.14,1.3.6.1.4.1.2021.4.15,1.3.6.1.4.1.2021.4.6]
system.unix.memory.usedUnix Memory UsedKBMonitors the UNIX used memory.
system.unix.memory.swap.usedUnix Swap Memory UsedKBMonitors the amount of used swap memory.[OIDs: 1.3.6.1.4.1.2021.4.3.0,1.3.6.1.4.1.2021.4.4.0]
system.unix.memory.swap.totalUnix Swap Memory TotalKBMonitors the total amount of swap space configured for this host.[OID: 1.3.6.1.4.1.2021.4.3.0]
Storage Utilization - HR-MIBsystem.disk.util.percentDisk Utilization%Monitors the disk utilization.[OIDs: 1.3.6.1.2.1.25.2.3.1.4,1.3.6.1.2.1.25.2.3.1.5,1.3.6.1.2.1.25.2.3.1.6]
System Uptimesystem.uptimeSystem UptimesThe time since the SNMP agent in the system was last re-initialized.[OID : 1.3.6.1.2.1.1.3.0]